Verilux Indoor Furnishings PL03 User Manual

®
Planet Light  
PL03  
Energy Saving Natural Spectrum®  
Desk Lamp  
 
IMPORTANT SAFETYINSTRUCTIONS  
SAVE THESE INSTRUCTIONS  
Thank you for purchasing the Planet Light® Energy Saving Natural Spectrum®  
Desk Lamp. Please read the following safety information before using. To reduce  
the risk of re, electrical shock, or injury to persons:  
• Do NOT dismantle.  
• Do NOT alter power cord.  
• Turn off/unplug and allow to cool before replacing bulb or cleaning.  
• For indoor use only.  
• The lamp is an electrical device. DO NOT USE NEAR WATER.  
GENERAL PRECAUTIONS  
• Before plugging in the lamp, check to make sure the voltage corresponds  
with the main voltage of your location (120 volts).  
• Do not use the lamp outside or in wet locations such as bathrooms. It is  
intended for indoor, dry use only.  
• Not for use with light dimmers, timers, motion detectors or extension cords.  
• This product may cause interference with radios, cordless telephones,  
or devices that use a wireless remote control such as televisions. If  
interference occurs, move the product away from the device, plug the  
product or device into a different outlet or move the lamp out of the line of  
sight of the remote control receiver.  
• Do NOT use lubricating agent in assembly; please see troubleshooting  
section if you are having difculty assembling your lamp.  
• Unplug from electrical outlet for extended periods of non-use or during  
lightning storms to ensure protection of the electronics.  
3
 
GETTINGSTARTED  
Main Parts & Controls  
E. Polarized Plug  
F. Bulb  
G. Switch  
A. Lamp Head  
B. Gooseneck  
C. Lamp Base  
D. Power Cord  
A
B
D
C
E
Close-up of Lamp Head  
A
F
G
4
 
BULB INSTALLATION  
To prevent damage during shipping, the Verilux bulb is surrounded by  
protective padding. Carefully remove and dispose of the protective  
padding. Check to ensure that the bulb is fully seated and has not  
come loose from the socket during shipping. There should be no gap  
between the bulb and socket.  
Before bulb installation, please review all instructions.  
Installation  
1. Unplug lamp from power source.  
2. Firmly hold base (B) and push bulb (C) into the socket (A).  
3. Be sure bulb is rmly seated in the socket (see below) and  
snapped into the metal bulb clip (D).  
D
Removal  
1. Unplug lamp from power  
source.  
2. Firmly hold bulb base (B)  
and pull bulb (C) from the  
socket (A) in an outward  
motion.  
C
A
B
Incorrectly seated bulb  
Correctly seated bulb  
No  
Gap  
Notice  
Large Gap  
5
 
TROUBLESHOOTING  
• Make sure all power connectors, cords, and plugs are inserted fully  
and securely.  
• Make sure there is power to the wall outlet or try another outlet – not  
connected to a dimmer.  
Be sure the bulb is securely seated into the socket, repeat the bulb  
installation process. CAUTION: DISCONNECT LAMP FROM OUTLET  
PRIOR TO REPEATING THE BULB INSTALLATION PROCESS.  
CARE & CLEANING  
Your Planet Light® lamp is made from high quality materials that will last  
for many years with a minimum of care.  
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR  
CLEANERS CONTAINING ABRASIVES OR AMMONIA  
WARNING: To prevent risk of shock or personal injury  
when cleaning lamp, make sure you have turned off and  
unplugged the lamp, and allow sufcient time for the bulb  
to cool.  
6
 
One Year Limited Warranty  
ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE  
STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!  
Customer Service Department at 802-496-3101 during normal business hours.  
This limited warranty is provided by: Verilux®, Inc., 340 Mad River Park, Waitseld, VT 05673  
Verilux warrants this product to be free from defects in material and workmanship for a  
period of one year from the date of the original retail purchase from Verilux or an authorized  
Verilux distributor. Proof of purchase is required for all warranty claims. During the  
limited warranty period, Verilux, Inc. will, at its option, repair or replace defective parts of  
this product, at no charge to the customer, subject to the following limitations: This limited  
warranty does not include any postage, freight, handling, insurance or delivery fees. This  
warranty does not cover damage, defect or failure caused by or resulting from accident,  
external destruction, alteration, modication, abuse, misuse or misapplication of this  
product.  
This warranty does not cover damage to the product resulting from return shipping or  
handling. The use of shipping insurance is recommended to help protect your product.  
Return Authorization is required for all returns. To obtain a Return Authorization, please  
contact the Verilux Customer Service Department at 802-496-3101.  
If, during the rst year of ownership, this product fails to operate properly, it should be  
customer service representative at 802-496-3101.  
Note: Verilux recommends using a quality surge suppressor on all electronics equipment.  
Voltage variations and spikes can damage electronic components in any system. A quality  
suppressor can eliminate the vast majority of failures attributed to surges and may be  
purchased at electronics stores.  
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.  
7
 
Printed in China for Verilux, Inc.  
© Copyright 2010 Verilux, Inc. All rights reserved.  
PL03-MAN-Rev4  
 

Timex Watch W 865 User Manual
Toastmaster Convection Oven XO 1N User Manual
TP Link Network Card TF 3239DL User Manual
TP Link Network Router TL SG3210 User Manual
Tripp Lite Battery Charger APSX1012SW User Manual
Troy Bilt Trimmer TB554 User Manual
Vanguard Heating Stove SCIVFB SCIVFG SCIVFC SCIVFR User Manual
Victory Refrigeration Freezer FIA 1D S7 XH User Manual
ViewSonic Flat Panel Television VS11620 1M User Manual
Wayne Dalton Garage Door Opener KEP IV User Manual